Cannon Instrument CAV-2000 - Manual (Page 73)

67
CANNON ® Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO ® Instruction & Operation Manual
Version 2g — May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
Uploading the configuration
The currently-saved Energy Saver configuration is automatically up-
loaded to the CAV microprocessor:
• at VISCPRO start-up (unless the CAV instrument is in Energy Saver
(“sleep”) mode, in which case the information will be uploaded at the
conclusion of the sleep cycle)
• at the conclusion of testing
• whenever the instrument temperature is changed
• whenever the Energy Saver configuration is changed (unless instru-
ment is currently testing samples)
Disable Energy Saver for this day
To disable the Energy Saver for a single day, click the Disable Energy
Saver for this day checkbox. Clearing the checkbox enables the Energy
Saver option for that day. Checking the box erases the daily configura-
tion, allowing you to set a new configuration if desired. You must click
the Update button or press the Enter key for each daily configuration
change to be recorded. You must click the OK button to save all
changes.
Disable All Click the Disable All button to erase all previously-set Energy Saver
daily configurations. You must click the OK button to save all
changes.
NOTE Disabling the configurations deletes them from the computer memory.
Once you save your changes, previous configurations cannot be recov-
ered, but must be recreated.