Cannon Instrument CAV-2000 - Manual (Page 60)

CANNON ® Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO ® Instruction & Operation Manual
Version 2g — May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
54
Saving a configuration
Whenever you have altered instrument, tray or sample configuration, you
may wish to save the resulting settings as a new or existing configuration.
To save current settings, use the Save Instrument option:
Procedure 1. From the VISCPRO ® primary menu options, click Configure.
2. Select the desired instrument and click Save Instrument & Tray
Settings. The Save Configuration window will appear.
3. Type a name for the new configuration in the Save As: box. Or
double-click an existing configuration from the configuration list box.
4. Click OK to save the configuration. Or click Cancel to exit the
Save Instrument & Tray Settings window without saving your
changes.
Restoring instrument settings from a saved configuration
There are three options for restoring instrument settings from a saved
configuration. These restore options are individually selectable from the
Restore Instrument Settings window.
NOTE The Restore Instrument Settings and Restore Tray Settings options are
only available if you are logged in as a manager.
Restore procedure To restore instrument settings from a saved configuration:
1. Click on Restore Instrument Settings from the Configure menu
options for the desired instrument.
2. Select the desired saved configuration from the list box.
3. Use the check boxes to select the desired configuration elements to
be restored.
Restore Instrument Settings restores instrument properties from
the saved configuration.
Restore Tray Settings restores tube/tray/wash properties from the
saved configuration.
Restore Sample Information restores all sample ID setup informa-
tion for the Sample Input window from the saved configuration.
4. Click OK. If you clicked the check box to restore instrument, tray or
sample settings, the current instrument will be updated with the
selected settings.