Cannon Instrument CAV-2000 - Manual (Page 65)

59
CANNON ® Automatic Viscometer Models CAV-2100 and CAV-2200 with VISCPRO ® Instruction & Operation Manual
Version 2g — May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
7. Enter the desired sample ID, using up to 21 alphanumeric characters;
then press the T or R key.
Selecting sample actions
8. Whenever a new sample ID is entered, the sample action defaults to
Measure Sample Viscosity. To access all sample action options,
highlight the desired sample and right-click the mouse or press 5.
The Sample Action popup window will appear.
9. Select the desired sample action from the window by clicking on it.
Sample actions
No action—clears action column
for highlighted samples. No testing
will take place for this tray position.
Measure kinematic viscosity—
measures sample viscosity.
Verify Known KV—measures
sample viscosity at the conclusion
of the automated test and tags data
for possible use in calibrations/
reports.
Configure—permits adjustment of
sample run specifications for
selected individual samples/stan-
dards from the Viscosity Action window (see next page). The
Configure options will vary depending on the selected sample action
(Measure Sample Viscosity or Verify Known KV). Note that
changes to Configure options will override general settings.
Delete—Deletes currently-selected sample data. Samples in suc-
ceeding tray positions will be moved up to fill the empty “slot”.
Insert At—Inserts a sample field at the currently-selected location.
Copy All Selected Samples—copies selected sample IDs
Paste Into Selected Samples—pastes selected sample IDs
Sequential Sample IDs—Numbers selected samples automatically.
Clear All Trays—Clears sample data for all trays.
The Viscosity Action popup