Checkline DFX-7 - Manual (Page 36)

Dakota Ultrasonics
32
ALARM: Toggles alarm mode on, off, or audible. Refer to page 111 for further info.
ALARM HIGH: Gives the user the ability to set the HI limit parameter. If the
measurement exceeds this value, a red light will illuminate and sound the internal
beeper. Refer to page 111 for further info.
ALARM LOW: Gives the user the ability to set the LO limit parameter. If the
measurement falls below this value, a red light will illuminate and sound the internal
beeper. Refer to page 111 for further info.
DIFFERENTIAL: Gives the user the ability to set a nominal value and the DFX-7 will
display +/- the difference from the nominal value entered. Refer to page 113 for
further info.
3.12 XFER (transfer) – Menu
BACKUP SETUPS: Enables the user the ability to backup the setups currently
stored in the DFX-7 to a PC via RS232 port. Refer the help section of the DFX-7
DakView software for a complete electronic manual.
RESTORE SETUPS: Enables the user the ability to restore the setups currently
saved on a PC to an DFX-7 via RS232 port. Refer the help section of the DFX-7
DakView software for a complete electronic manual.
BACKUP DATA: Enables the user the ability to backup grids or sequential log files
currently stored in the DFX-7 to a PC via RS232 port. Refer the help section of the
DFX-7
DakView software for a complete electronic manual.
RESTORE DATA: Enables the user the ability to restore grids or sequential log files
currently saved on a PC to an DFX-7 via RS232 port. Refer the help section of the
DFX-7 DakView software for a complete electronic manual.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
DFX-7
software version. Refer the Dakota Ultrasonics web site for information on the
latest firmware versions available for download.
3.13 CLR (clear) Key
The primary functions of the CLR key, is to clear a measurement from a grid or
sequential log files cell location or set obstruct, and backspace in an Alpha Edit Box.
If a user has already saved a measurement and B-Scan to a cell location, use this
key to clear the measurement at any time.