Checkline DFX-7 - Manual (Page 92)

Dakota Ultrasonics
88
Note: This is a combined procedure that works the same for any of the features
associated with the gates, regardless of which feature and gate number that is being
adjusted. Therefore (Ж) = Gate1, Hold-Off, and Width respectively. Finally, the
illustrations may not be applicable to the exact feature being adjusted, but the
concepts relevant.
Adjusting the Features of the Gates Using the Hot Menus
Gate Holdoff ‘s Width’s
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move right and the ESC key multiple times to
move left, until the (Ж) cell is highlighted.
2) If the correct (Ж) is displayed, press the UP, DOWN, LEFT, and RIGHT
arrow keys to scroll the highlighted value.
3) Alternatively, if the correct (Ж) is not being displayed, press the ENTER
key to display the List Box.