KEYENCE DL-PN1 - Manual (Page 16)

14 - PROFINET Communication Unit DL-PN1 User's Manual (IB) -
*1 Functions assigned to the external input request 1 to 4 are as follows:
• External input request 1: ZERO SHIFT input
• External input request 2: RESET input
• External input request 3: TIMING input
• External input request 4: ADJUST input
Functions assigned to the external input request 1 to 4 can be changed.
Refer to the IB series user's manual.
*2 If the judgment value is correct, the parameter range is
- from - 999.97 to +999.98 (percent mode).
- from - 99.997 to +99.998 (size mode).
In percent mode:
• When the comparator value is over range, "+999.99" is stored.
• When the comparator value is under range, "-999.99" is stored.
• When the comparator value is invalid, "-999.98" is stored.
• When an error occurs, "+1000.00" is stored.
In size mode:
• When the comparator value is over range, "+99.999" is stored.
• When the comparator value is under range, "-99.999" is stored.
• When the comparator value is invalid, "-99.998" is stored.
• When an error occurs, "+100.000" is stored.
 Access Address (Slot 1 to 4)
180 to
191
Reserved for system
192 Setting error
When the sensor amplifier
setting is abnormal, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
193 EEPROM writing
When the sensor amplifier is
reflecting the setting after the
setting change, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
194 Laser emission stop status
When the light emission of
the sensor amplifier stops,
the corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
Index
(DEC)
Function name Description
Data
type
Attribute Value
Index
(DEC)
Function name Description
Data
type
Attribute
Default
value
Value
0 Reserved for system
1 Zero shift request DINT C
2 Zero shift reset request DINT C
3 Reset request DINT C
4 Error clear request DINT C
5 Initial reset request DINT C
6 System parameter set request DINT C
7 to 9 Reserved for system