4 connection, Power, Installation – ALTANA LCM III User Manual
Page 10
Advertising
9
Installation
3.4 Connection
The LCM III has two USB interfaces as a standard feature, located
on the back of the instrument (
The USB Type A interface is used for communications with a
printer, USB memory stick or keyboard. A USB memory stick is
used to update instrument software.
The USB Type B interface is used for communications with a PC.
The optional Data Trans software must be installed on the PC for
this use.
A USB hub may be used to connect several accessories at a time.
Note: USB cables must not be longer than 3 meters (10 feet).
These USB interfaces enable data and graphics to be output to a
Printer and a PC and upgrade instrument software (see
Figure 2 Interfaces
1
On/Off switch
4
Cover
2
USB type B
5
USB type A
3
Plug in power supply
Advertising