3 store, recall, send and delete data, 1 auto/manual data storage, 2 recall stored data from the data log – ALTANA LCM III User Manual
Page 27
26
Standard Operations
5.3 Store, recall, send and delete data
The Data Log will store up to 200 color measurments taken in the
Color Measurements modes.
A complete record of the analysis is stored, including the Date,
Time, Results, Sample ID and Operator ID.
5.3.1 Auto/manual data storage
The data storage parameter indicates whether data are to be stored
automatically or manually (in which case the user has to decide
which data to store).
1.
Press Store: On/Off in the Options menu.
•
Store On setting: All measurement data are stored
automatically.
•
Store Off setting: No measurement data are stored.
However, this setting can be changed to Store On in the
result display through Configuration. The reading currently
shown in the display is then stored.
Note: When the instrument memory (data log) is full, the oldest data are
automatically deleted allowing the new data to be stored.
5.3.2 Recall stored data from the data log
1.
Press Recall Data in the Main Menu.
2.
Press Data Log.
A listing of the stored data is displayed.
3.
Press Filter: On/Off.