ALTANA LCM III - Manual (Page 9)

8
Installation
3.3 Power connections
Install the correct adapter plug on the supplied external power
supply (
Figure 1 ). Slide the adapter on until it "clicks" into position.
Correctly mounted, both housing of power supply and plug are in
line. Plug the external power supply cord into the connector on the
back panel of the instrument, then plug the supply into a power
outlet (100–240 V~ / 50–60 Hz). Press the power switch on the
back of the instrument to initialize power (
Figure 2 on page 9 ).
Figure 1 Power adapter
1 Power supply with EU adapter plug installed 3 USA adapter plug
2 UK adapter plug 4 AUS/China adapter plug