ALTANA Spectro-Guide Sphere Gloss Manual - Manual (Page 32)

31
8.3 Number of readings
From the “File” menu, use the
button to move the cursor to the “Mean” option.
The submenu opens when you press the Operate
button. Use the
button to move the cursor to “Define N” and press
the Operate button. The input menu for the number
of readings appears. The preset value is 3. You can
use the
buttons to select the appropriate digit at the position
indicated by the arrow. Use the
button to move the arrow to the next decimal
position.
Then press the Operate button, and the new number
of readings is stored.
The number of readings can only be altered in the
advanced version.
Multiple readings
std
std
std
std
File
Mean On/Off
f
Display Option
Open
Save
Delete
Print Del last
Define N
f
f
f
f
File Display Option
Number of Readings
per Mean Value
N=03