ALTANA Spectro-Guide Sphere Gloss Manual User Manual
Page 49
48
Options
10.6.4 CMC ratio
From the “Options” menu, use the
button to move the cursor to the “Setup” option.
The submenu opens when you press the Operate
button.
Move the cursor to the “CMC Ratio” option and
press the Operate button. The input menu for the
CMC Ratio appears. Use the
buttons to change the underlined digit. Use the
button to move the underline to the next digit.
End the input operation by pressing the Operate
button. Having done this, you are prompted to enter
the commercial factor (cf). After pressing the
operate button, the instrument returns to the
measuring mode.
To end the input operation without storing the data,
use the
buttons to exit the input field.
std
std
std
std
File
Display
Color sys
AutoStore
Index
Auto Std
IIIum/Obs
MI Limit
Calibr.
ΔE94Ratio
Configure
Disp Time
Beeper
f
f
f
f
f
Option
CMC Ratio
Setup
f
f
Gloss
_
File
Display
Input
Ratio L : C
Option
02.00 : 01.00
File
Display
Input
Option
Commercial Factor (cf)
01.00
↑
Recommended setting:
L : C = 2.00 : 1
Recommended setting:
01.00