Avlink HRM-602P - Manual (Page 10)

H H H R R R M M M - - - 6 6 6 0 0 0 2 2 2 P P P
9
CHAPTER 4 DEVICE INSTALLATION
The Switcher has a black metallic housing. It can be placed on a sturdy desk directly or
installed on a bracket. See Figure 4-1 below:
Figure 4-1 Mount the Device on a Standard Bracket with 1U Rack-mount
CHAPTER 5 FRONT/REAR PANELS
5.1 Front Panel
Figure 5-1 HRM-602P Switcher Front Panel
The HRM-602P Switcher supports up to 12 switching keys on the Front Panel for
indicating the connection status of the Main or Slave window that allows you to switch
each screen quickly.
 MAIN 1~6 keys (Main window): Specifies the one of input HDMI1~ HDMI6 channel to
a Main window output. These keys configure the signal sources of HDMI1~HDMI6
channels upon the Main window. You can also use these keys to switch input channels.
 SLAVE 1~6 keys (Slave window): Specifies the one of input HDMI1~ HDMI6 channel
to a Slave window output. These keys configure the signal sources of HDMI1~HDMI6
channels upon the Slave window. You can also use these keys to switch input
channels.
 Audio Source key: Press this key to switch the audio source comes from the main
window or slave window.
- MAIN LED indicator: When the input channel for the Main window is selected
as the audio source, the MAIN LED indicator will become solid green.