Appendix a ir controller – Avlink HRM-602P User Manual
Page 41
Advertising
H
H
H
R
R
R
M
M
M
-
-
-
6
6
6
0
0
0
2
2
2
P
P
P
40
APPENDIX A IR CONTROLLER
The HRM-602P Switcher supports a remote controller allows you to remote switch which
Input signal by passing through to current output with an extended connection - IR
receiver/transmitter. The signal for controller is only available to the IR receiver
connected to the IR hole located on the rear panel.
Main Channel Port selection:
Press the Number#1~6 button to select the channel to the Main channel.
Example: Press the “5” button on the Remote controller specified the input signal of the
Main channel comes from the channel#5.
Slave Channel Port selection:
Press the “0” + Number#1~6 button to select the channel to the Slave channel.
Advertising