Avlink HRM-602P - Manual (Page 44)

H H H R R R M M M - - - 6 6 6 0 0 0 2 2 2 P P P
43
 For 0: General selecting, you have to adjust the switcher ID on the real panel to “0”
that means the device with ID “0” will be upgraded.
4. For 1: Switcher Device will allow you to select target device based on ID 0 to 31 for
upgrading firmware.
5. Select “2: Switcher I/O Module” will allow you to upgrade I/O modules. You have to
decide which device you want to configure, and then select the suitable Device ID
and I/O Module from the drop-down menu. Click “Update” to upgrade.