Avlink HRM-602P - Manual (Page 11)

H H H R R R M M M - - - 6 6 6 0 0 0 2 2 2 P P P
10
- SLAVE LED indicator: When the input channel for the Slave window is
selected as the audio source, the SLAVE LED indicator will become solid green.
 Only one of input channel can be configured as output source.
 Audio Delay: The HRM-602P Switcher supports you 0, 10, 20, 30, 40, 50, 70 and 70
ms audio delay settings. Usually, when you process the video images, at times, it can
take longer than processing the audio signal. The longer processing time is called
latency. Audio Delay feature is designed to correct for this latency so that the signals
between audio and video can be transmitted synchronously
 Aspect: The HRM-602P Switcher allows you to configure the Aspect ratio of the output
image including Full and Actual aspect.

Figure 5-2 Full Aspect
 When the Full aspect for the output image is configured, the FULL LED indicator will
become solid green.