Avlink HRM-602P - Manual (Page 8)

H H H R R R M M M - - - 6 6 6 0 0 0 2 2 2 P P P
7
CHAPTER 2 FEATURES
 Up/down/cross converter equipped with HDMI input/output.
- Supports interlaced video to progressive video. (like 1080i => 1080P)
- Supports up convert. (like VGA => 1080P@60)
- Supports down convert. (like 1080P@60 => VGA)
- Supports cross convert. (like 576i@50 => 1080P@60)
 HDTV resolution up to 1080p.
 Compliant with the specification of HDMI.
 Supports 7 * display mode. (1* Normal mode, 4* PIP mode, 2* PBP mode).
- On the display mode 0 (only display one channel each time.) You can switch
between input channels to an output display directly without any idle time.
 Supports adjustable audio delay time for lip-sync (up to 70 ms).
 Supports 2 * aspect ratio modes.
- “Actual”(1:1) Aspect ratio mode: This mode keeps the output image have the
horizontal and vertical ratio as same as the input image comes from the video.
That makes the output image has no distortion.
- “Full” Aspect ratio mode: This mode modifies the original input image comes
from the video to fit the aspect ratio of your output display. Sometimes the
image will be cut or distorted so that it can fit in with the screen of your output
display.
 Supports 8 * output resolution: VGA, 480P, SVGA, XGA, 720P, SXGA, UXGA,
1080P.
 Supports “Audio Delay” adjustment to allow the sync-processing images and
audio signals without latency.
 Supports both HDMI and VGA output.
 Supports RS-232 control.
 Supports Ethernet control.
 Remote controller for operation.
 Hot pluggable and 1U rack design.
 EDID management (Copy from OUT port).
 Auto skips over the power-off and unplugged cable.