1 main operation interface – Avlink HRM-602P User Manual
Page 28
H
H
H
R
R
R
M
M
M
-
-
-
6
6
6
0
0
0
2
2
2
P
P
P
27
Figure 7-3《AV Matrix》Software Application Main Window
The Device ID is based on the DIP of switcher located on the rear panel.
Slide the scrollbar on the lower left area of main window to view all contents (including ID,
Name, A/V, I/O (only for VO/AO reference), Memory, VI Plug, AI Plug, VO Plug, AO Plug,
EDID Type, Volume, Bass, Treble, Subwoofer, Delay, Delay Unit, Max Delay and Version)
as described below:
ID: Specify the ID address of Switcher switching device.
Name: The name of Switcher switching device.
A/V: Specify the character of audio or video. Or both of audio and video are supported
will show “Video”.
I/O: Ports quantities of Input and Output.
7.2.1 Main Operation Interface
You can slide the scrollbar on the Input / Output area to view all configured ports. For the
basic operation is described as below:
Examples for selecting switching functions:
Example: Now there is an HRM-602P Switcher having all the input/output ports properly
connected to the equipment. If you want to set channel 1 input to channel 2, 3 and 4
output; channel 3 inputs to channel 1 output. There are 2 ways to implement the
switching. Please follow the ways and steps to finish the switching functions:
First way: Directly click on the corresponding icons on the Matrix
to transform them
into
to complete the switching operation.
Second way:
Step 1: First select the “Output” number keys 002, then select 003 and final select 004
to the right of the blue configuration area, and select the “Input” number key 001 to the
bottom. Then, press consecutively the previously selected “Output” number keys 002,
003 and 004. This way, you have selected “Input” 001 and “Output” 002, 003 and 004
switching.
Step 2: First select the “Output” number key 001 to the right of the blue configuration
area, and select the “Input” number key 003 to the bottom. Then, press the previously
selected “Output” number key 001. This way, you have selected Input 03 and Output
001 switching.