Avlink HX-2344Z - Manual (Page 11)

S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
10
CHAPTER 4 DEVICE INSTALLATION
HX-2344Z has a black metallic housing. It can be placed on a sturdy desk directly or
installed on a bracket. See Figure 4-1 below:
Figure 4-1 Mount HX-2344Z on a Standard Bracket with 1U Rack-mount
CHAPTER 5 FRONT/REAR PANELS
5.1 Front Panel
Figure 5-1 HX-2344Z Front Panel
The HX-2344Z supports up to 4 Output/Input routing keys on the Front Panel allowing
you to route signal quickly. Also refer to Chapter 8 Operation Examples about below
descriptions.
Operation methods as follows:
“Output Channel” + “Input Channel”
 OUT 1~4 keys (output channel): Indicate the Channel 1~Channel 4 for RJ-45 single
output to peripheral displays. You can also use these keys to adjust the status or
access the configurations.
 IN 1~4 keys (input channel): Indicate the Channel 1~Channel 4 for HDMI single input.
You can also use these keys to switch the source signals come from the individual
channel or use them to instead of number keys upon memory selections.