Avlink HX-2344Z - Manual (Page 13)

S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
12
- The relation among all settings will be saved in the memory permanently.
 RCL: The “Retriever Key” retrieves all the settings that are saved in the memory.
- Press the “RCL” key firstly.
- Then make a random to select one of output/input channel key 1~4.
- The system will retrieve the saved all status and implement current status routing
if the previously saving channel is selected.
 Press and hold STO+RCL keys simultaneously at least 1 sec. to restore to factory
default values.
 LCD: LCD display shows current Matrix Switcher and operation status.
 Press any keys on the front panel or controller to enable the light of LCD momentarily.
This function cannot be controlled by RS-232 or LAN.