Avlink HX-2344Z - Manual (Page 4)

S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
BEFORE YOU BEGIN
 Follow all instructions marked on the device during using.
 Provide proper ventilation and air circulation and do not use near water.
 It is better to keep it in a dry environment.
 Place the device on a stable surface (example cart, stand, table, etc.).
 The system should be installed indoor only. Install either on a sturdy rack or desk in a
well-ventilated place.
 Make sure the rack is level and stable before extending a device from the rack.
 Make sure all equipments installed on the rack including power strips and other
electrical connectors are properly grounded.
 Only use the power cord supported with the device.
 Do not use liquid or aerosol cleaners to clean the device.
 Always unplug the power to the device before cleaning.
 Unplug the power cord during lightning or after a prolonged period of non-use to avoid
damage to the equipment.
 Do not stand on any device while installing the device to the rack.
 Do not attempt to maintain the device by yourself, any faults, please contact your
vendor.
 Save this manual properly for future reference.