Avlink HX-2344Z - Manual (Page 33)

S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
32
Figure 7-3《AV Matrix》Software Application Main Window
 The Device ID is based on the DIP of switcher located on the rear panel.
Slide the scrollbar on the lower left area of main window to view all contents (including ID,
Name, Audio, Video, Input, Output, Memory, VI Plug, AI Plug, VO Plug, AO Plug, EDID
Type, Volume, Bass, Treble, Subwoofer, Delay, Delay Unit, Max Delay and Version) as
described below:
ID: Specify the ID address of selected Switcher.
Name: The name of selected Switcher.
Audio/Video: Specify the character of audio or video. Or both of audio and video are
supported will both show “Support”.
Input/Output: Ports quantities of Input and Output.
7.2.1 Main Operation Interface
You can slide the scrollbar on the Input / Output area to view all configured ports. For the
basic operation is described as below:
Examples for routing functions:
Example: Now there is an HX-2344Z Switcher having all the input/output ports properly
connected to the equipment. If you want to set channel 1 input to output displayer 1,
please follow the ways and steps to finish the functions: