Avlink HX-2344Z - Manual (Page 52)

S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
51
APPENDIX C HDBASET FIRMWARE UPGRADE
Process the Update TX_xxx.bat or UpdateRX_xxx.bat file to upgrade firmware. (xxx is
specified for firmware version)
- The UpdateTX_xxx.bat file is used to upgrade the splitter or D.A system firmware.
- The UpdateRX_xxx.bat file is used to upgrade the Extender firmware.
HX-SRPUW HDBaseT F/W Upgrade
Follow the steps as below to upgrade the Extender firmware:
1. Connect the control PC and HX-SRPUW with a RS-232 cable.
2. Connect the LAN cable to the LINK IN port on the panel of HX-SRPUW. The other
end of the LAN cable connected to the OUT LAN port of HX-2344Z. Through the LAN
cable connection, the HX-SRPUW will get the power source to process firmware
upgrade.