Bricasti Design M7 Mainframe Stereo Reverb Processor Owner’s Manual - Manual (Page 14)

Mounting the M7
Cables–Wiring-Analog I/O
The M7 has balanced analog inputs and outputs following the industry standard practice of pin 2
hot. Below is a diagram showing how to connect the M7 in balanced and un-balanced
configurations:
XLR to XLR XLR to Jack XLR to Jack
Balanced Balanced Un-Balanced
1 2
3
1 2
3 3
1 2
2
3
1
Wiring the Digital I/O
The M7 has balanced AES digital inputs and outputs and should be used only with balanced AES
sources. Care should be taken to only use cabling for the installation that is designed for AES
digital audio data, and not “mic” cable or other analog audio patch or instrument cables. Using
incorrect cables can cause clicks and dropouts in the audio of the M7 and yield poor, unreliable
results.
For this application we recommend Reference Laboratories RAC 01 or RAC 02 for fixed
installations, or the RMC 08 or RMC 10 for live applications where flexibility is needed.
For more info about their products, contact them at: www.referencelaboratory.com
1-3