Bricasti Design M7 Mainframe Stereo Reverb Processor Owner’s Manual - Manual (Page 29)

System Mode-Parameters
•
Lock Reg Bank: Protects the user registers, by banks, from being overwritten.
Turn the adjust knob to select the bank you want to protect and press Enter. This will
lock the bank. On the lower display, the character “L” will appear after the bank number
to indicate the bank is locked. This “L” will appear in both the system menu and the
register select menu to show the bank is locked.
•
Unlock Reg Bank: Unlocks the selected register bank. Registers in that bank can now
be written to, or overwritten, when pressing Store on the front panel. On the lower
display after the bank number the character “L” will disappear in both the system menu
and the register select menu when the bank is unlocked.
Turn the adjust knob to select the bank you want to unprotect and press Enter. This will
unlock the bank.
•
Clear Reg Bank: Clears the selected register bank of all stored programs. You can not
clear a register bank with an active running program loaded from that bank. In this case
you will get a message “Bank is Active” and you must load a new preset from a program
bank, favorite key, or a different register before you can clear the bank.
Turn the adjust knob to select the bank you want to clear and press Enter. This will clear
the bank.
2-10