Cadillac 2011 DTS - Manual (Page 14)

Black plate (8,1) Cadillac DTS Owner Manual - 2011
Memory Features
On vehicles with the memory feature, the controls on
the driver door are used to program and recall memory
settings for the driver seat, outside mirrors, and the
steering wheel position, if the vehicle has the power tilt
wheel and telescopic steering feature.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, including the seatback
recliner and lumbar, both outside mirrors, and the
steering column.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must
be in P (Park). A single beep will sound. The seat,
outside mirrors, and steering column will move to the
position previously stored for the identified driver.
See Memory Seat, Mirrors and Steering Wheel on
page 2‑6 for more information.
Easy Exit Driver Seat
This feature can move the seat rearward and the power
steering tilt wheel, if equipped, up and forward to allow
extra room to exit the vehicle.
S
: Press to recall the easy exit seat position. The
vehicle must be in P (Park).
A single beep sounds. The driver seat will move back,
and if the vehicle has the power steering column and
telescopic steering feature, the steering column will
move up and forward.
See Memory Seat, Mirrors and Steering Wheel on
page 2‑6 and “Easy Exit Recall” and “Easy Exit Setup”
under DIC Vehicle Customization on page 4‑74 for
more information.
1-8