When the system does not seem to work properly, Backing – Cadillac 2011 DTS User Manual

Page 141

Advertising
background image

Black plate (39,1)

Cadillac DTS Owner Manual - 2011

Description

Metric

English

four amber/ two red lights

flashing and beep for

five seconds

ACC — two amber lights/
one red light flashing and

beep for five seconds

0.3 m

1 ft

Backing

Ultrasonic Rear Parking Assist (URPA) comes on
automatically when the shift lever is moved into
R (Reverse). The rear display will then briefly illuminate
to let you know the system is working.

The following describes what will occur with the rear
display as you get closer to an object detected in the
rear of your vehicle:

Description

Metric

English

amber light

2.5 m

8 ft.

amber/amber lights

1.0 m

40 in.

amber/amber/red lights and

continuous beeping for

five seconds

0.6 m

23 in.

amber/amber/red lights

flashing and continuous

beeping for five seconds

0.3 m

1 ft.

The system can be disabled through the Driver
Information Center (DIC). See “Parking Assist” under
DIC Operation and Displays on page 4‑58 for more
information.

When the System Does Not Seem to
Work Properly

If the URPA system will not activate due to a temporary
condition, the message PARK ASSIST OFF will be
displayed on the DIC and a red light will be shown on
the rear URPA display when the shift lever is moved
into R (Reverse). This occurs under the following
conditions:

.

The driver disables the system.

.

The ultrasonic sensors are not clean. Keep the
vehicle's rear bumper free of mud, dirt, snow, ice
and slush. For cleaning instructions, see Washing
Your Vehicle on page 6‑98
.

.

A trailer was attached to the vehicle, or a bicycle or
an object was hanging out of the trunk during the
last drive cycle, the red light may illuminate in the
rear display. Once the attached object is removed,
URPA will return to normal operation.

.

A tow bar is attached to the vehicle.

3-39

Advertising