Braking in emergencies, Stabilitrak® system, Stabilitrak – Cadillac 2011 DTS User Manual

Page 275: System on, Braking in emergencies -5 stabilitrak, System -5, System, Using abs

Advertising
background image

Black plate (5,1)

Cadillac DTS Owner Manual - 2011

front of you, there will not be enough time to apply the
brakes if that vehicle suddenly slows or stops. Always
leave enough room up ahead to stop, even with ABS.

Using ABS

Do not pump the brakes. Just hold the brake pedal
down firmly and let antilock work. The antilock pump or
motor operating might be heard and the brake pedal
might be felt to pulsate, but this is normal.

Braking in Emergencies

ABS allows the driver to steer and brake at the same
time. In many emergencies, steering can help more
than even the very best braking.

Brake Assist

This vehicle has a Brake Assist feature designed to
assist the driver in stopping or decreasing vehicle
speed in emergency driving conditions. This feature
uses the stability system hydraulic brake control module
to supplement the power brake system under conditions
where the driver has quickly and forcefully applied the
brake pedal in an attempt to quickly stop or slow down
the vehicle. The stability system hydraulic brake control
module increases brake pressure at each corner of the
vehicle until the ABS activates. Minor brake pedal
pulsations or pedal movement during this time is normal
and the driver should continue to apply the brake pedal
as the driving situation dictates The Brake Assist

feature will automatically disengage when the brake
pedal is released or brake pedal pressure is quickly
decreased.

StabiliTrak

®

System

The vehicle may have the StabiliTrak system which
combines antilock brake, traction and stability control
systems and helps the driver maintain directional
control of the vehicle in most driving conditions. This is
accomplished by selectively applying any one of the
vehicle's brakes and reducing engine power.

The StabiliTrak system comes on automatically
whenever the vehicle is started. The system cannot be
turned off.

This light will flash when
the system is operating.

The STABILITRAK NOT READY message may be
displayed in the Driver Information Center (DIC) and the
Traction Control System (TCS)/StabiliTrak warning light
on the instrument panel cluster comes on after first

5-5

Advertising