Muting a call, Transferring a call, Voice pass-thru – Cadillac 2011 DTS User Manual

Page 267

Advertising
background image

Black plate (109,1)

Cadillac DTS Owner Manual - 2011

Muting a Call

During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the call
cannot hear them.

To mute a call, press

b g

, and then say “Mute Call.”

To cancel mute, press

b g

, and then say

“Un‐mute Call.”

Transferring a Call

Audio can be transferred between the Bluetooth system
and the cell phone.

The cell phone must be paired and connected with the
Bluetooth system before a call can be transferred. The
connection process can take up to two minutes after the
ignition is turned to ON/RUN.

To Transfer Audio From the Bluetooth
System to a Cell Phone

During a call with the audio in the vehicle:

1. Press

b g

.

2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System
From a Cell Phone

During a call with the audio on the cell phone, press

b

g

. The audio transfers to the vehicle. If the audio does

not transfer to the vehicle, use the audio transfer feature
on the cell phone. See your cell phone manufacturers
user guide for more information.

Voice Pass-Thru

Voice pass‐thru allows access to the voice recognition
commands on the cell phone. See your cell phone
manufacturers user guide to see if the cell phone
supports this feature.

To access contacts stored in the cell phone:

1. Press and hold

b g

for two seconds.

2. Say “Bluetooth.” The system responds “Bluetooth

ready,” followed by a tone.

3. Say “Voice.” The system responds “OK, accessing

<phone name>.”

.

The cell phone's normal prompt messages will
go through its cycle according to the phone's
operating instructions.

4-109

Advertising