CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 113)

Installing Software
105
3
• Click [DeskTopBinder V2 Lite], and then the DeskTopBinder V2 Lite Setup
screen appears.
CCCC
Click [ScanRouter V2 Lite] or [DeskTopBinder V2 Lite]. The installer of the soft-
ware starts. Follow the instructions on the screen.
Reference
For information about the subsequent installation procedure, see Setup
Guide that can be displayed from the Setup screen of the respective soft-
ware.
DeskTopBinder V2 Lite
Use Auto Run for installation.
System requirements
Limitation
❒ When installing the software in Windows NT Server or Windows 2000 Serv-
er, a stand-alone server must be used. Do not use the primary domain con-
troller or backup domain controller.
❒ If you install this software in an operating system, such as Windows NT
Workstation and Windows 2000 Professional, in which a client server is not
permitted to be used in a network, you may violate the license agreement of
Microsoft Corporation.
❒ Under Windows Server 2003, this software is not available.
• Hardware
PC/AT compatible
• CPU
Pentium 200 MHz or faster (Pentium II 350 MHz or faster recommended)
• Operating system
Microsoft Windows 95 (OSR 2 or later)
Microsoft Windows 98
Microsoft Windows Millennium Edition
Microsoft Windows 2000 Professional (Service Pack 1 or later)
Microsoft Windows 2000 Server (Service Pack 1 or later)
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later)
Microsoft Windows NT Server 4.0 (Service Pack 5 or later)
• Memory
64 MB or more (128 MB or more recommended)
• Hard disk space
Minimum free space required for installing: 200 MB
www.cnet.ie