CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 135)

Before Sending Scan Data
127
6
• When the message “ Connecting
with PC... Set original(s)
and select the settings from
the PC. ” is displayed on the dis-
play panel, the machine is stand-
ing by for the network TWAIN.
Press [Exit].
If there are no [Exit], the Network
TWAIN exclusive standby screen is
displayed. Set [7.Select Method] (in
[2.Send Scan Settings]
under the Scan-
n e r F e a t u r e s m e n u ) t o “ S e n d
File/TWAIN ”, and then restart the
machine.
• When a send file path name is dis-
played at the second line of the
screen, the standby screen for [En-
ter Custom Send File]
is displayed. In
this case, press [PrevMenu].
www.cnet.ie