CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 172)

Printing Scanned Image Files
164
10
To recall a registered print
settings
A Use the {{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to
highlight [User 1], [User 2] or
[User 3]
on the screen, and then
press [OK].
This returns to the Print Scan
standby screen, and the corre-
sponding print settings are dis-
played on the third line of the
screen.
To configure print settings
manually
A Use the {{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to
highlight [Manual] on the
screen, and then press [Set-
tings]
.
The first page of the Print Set-
tings screen ( Print Settings 1/2)
is displayed.
B Use the {{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to
highlight the setup items you
want to change, and then press
[Settings]
.
Reference
See p.79 “Information to Reg-
ister in [Print Settings]” for
details about each of the set-
up items.
C Highlight the option you want
to select by using the {{{{1 1 1 1}}}} or
{{{{0 0 0 0}}}} keys (and [Next] or [Prev.]
if necessary), and then press
[OK]
.
Note
❒ Pressing [Cancel] discards the
selected option, and returns
to the previous screen.
❒ When you select [Custom
Size] , use the number keys to
enter the dimensions of the
scan area (width and height).
D Repeat steps B B B B and C C C C as nec-
essary.
When you are finished, make
sure that the first page of the
Print Settings screen (Print Set-
tings 1/2) is displayed.
E Press [Next].
The second page of the Print
Settings screen (Print Settings
2/2) is displayed.
F Use the {{{{1 1 1 1}}}} or {{{{0 0 0 0}}}} key to
highlight the setup items you
want to change, and then press
[Settings]
.
Note
❒ If you change the settings in
[Enlarge] , [Reduce] and [Create
Margin] , only the latest setting
that you have selected within
all of these setup items ap-
plies.
G Highlight the option you want
to select by using the
{{{{1 1 1 1}}}} or
{{{{0 0 0 0}}}} keys, and then press [OK].
www.cnet.ie