CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 44)

Configuring the Scanner Settings
36
3
Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 “Initial Scanner Setup” for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.84 “Accessing the Scanner”.
*1 This setting becomes essential if you want to perform Scan to Folder (SMB) operation
from this machine. When you perform [Enter Custom Send File] operation using the
Web Status Monitor, it is not necessary to register [File Send Path] in advance.
Create a shared folder on a Windows compu-
ter
See Windows Help.
Configure [1.System Settings] on this ma-
chine
See p.52 “System Settings”
Configure [General Settings] on the Web Status
Monitor
See the Web Status Monitor Help.
Configure [2.SendScan Settings] and [4.Scan
Settings]
on this machine or on the Web Status
Monitor
See p.59 “Scanner Settings”.
Configure [Custom Title] settings on the Web
Status Monitor.
See the Web Status Monitor Help.
Configure [Send File], register [File Send Path] *1
and [File Name] on the Web Status Monitor
See p.92 “Information to register in
[File Send Path]
”
See the Web Status Monitor Help for
details about [Send File] and [File Name].
Recall the Settings on the Web Status Monitor
See p.98 “Recalling the Settings” for
details.
www.cnet.ie