CNET ecopy Printer/Fax/Scanner/Copier - Manual (Page 85)

Registering Scan Settings
77
3
B Use the {{{{1 1 1 1}}}} and {{{{0 0 0 0}}}} keys to
highlight the item you want to
i n p u t , a n d t h e n u s e t h e
number keys to input the val-
ue.
Note
❒ To correct the number you
have entered, use the
{{{{1 1 1 1}}}}
and {{{{0 0 0 0}}}} keys to highlight it,
and then press the
{{{{Clear
/ S t o p
}}}} key to c lear th e
number.
❒ You can also use the {{{{#}}}} key
as well as the {{{{1 1 1 1}}}} and {{{{0 0 0 0}}}}
keys to move selection.
C Press [OK].
This saves the setting you have
entered, and returns to the De-
fault Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
values you have entered, and
returns to the Default Scan
Settings menu.
MMMM
Press [Next].
“4. Image Density ” appears as the
setup item currently selected.
NNNN
Press [OK].
The setting screen for “4. Image
Density ” appears.
OOOO
Use the {{{{1 1 1 1}}}} and {{{{0 0 0 0}}}} keys to
highlight the setting you want.
PPPP
Press [OK].
This saves the setting you have se-
lected, and returns to the Default
Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
selected setting, and returns to
the Default Scan Settings menu.
QQQQ
By pressing [Next] to display “5.
Erase Colour ” through “11. Orig-
inal Settings ” as the setup item,
select options for each of them in
the same way that you have done
in steps
DDDD through GGGG .
RRRR
After all the settings are the way
you want, press [PrevMenu].
This registers the Scan Settings you
have configured to the “ Default ”
memory area, and returns to the
Scan Settings menu.
SSSS
While the Scan Settings menu is
displayed, press
{{{{2}}}}, {{{{3}}}} or {{{{4}}}}
key to display a corresponding
User Scan Settings menu.
For example, press the {{{{2}}}} key to
display the User 1 Scan Settings
menu.
www.cnet.ie