Presser foot types, Straight stitch foot (foot h), Automatic buttonhole foot (foot r) – Kenmore 200 User Manual
Page 16: Zipper foot (foot e), Overedge foot (foot c), Satin stitch foot (foot f), Blind hem stitch foot (foot g), Presser foot lifter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presser Foot Types
• Zigzag foot (Foot A)
Use this foot for both straight and zigzag stitching.
Straight stitch foot (Foot H)
Use this foot for exclusively for straight stitching with
center needle position.
Automatic buttonhole foot (Foot R)
Use this foot for one step automatic buttonhole sewing.
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
buttonhole as the button.
' Zipper foot (Foot E)
This foot can be set to sew on each side of the zipper.
The edge of the foot guides the zipper and keeps the
seam straight.
Overedge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
Blind hem stitch foot (Foot G)
Use this foot for perfect blind hemming and topstitching.
The foot has ridges on the bottom to keep the fabric from
slipping and a screw on top to guide the folded edge of
your hem.
10