Bobbin winding, Note, Bobbin winding -15 – Kenmore 200 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
Note:
Set the speed control lever at its fastest position for
bobbin winding.
CD
Upper thread guide
(2) Bobbin
(D
Bobbin winder spindle
Q] Guide the thread around the upper thread guide (T).
[2] Insert the thread through the hole on the bobbin (2),
threading from the inside to the outside. Put the
bobbin on the bobbin winder spindie (|).
[U
Push the bobbin winder spindie
(D
to the right. The
visual touch screen shows “Bobbin Winding”.
E]
With the free end of the thread held in your hand,
depress the foot control. Stop the machine when
the bobbin has made a few turns, and cut the
thread close to the hole on the bobbin.
[5] Depress the foot control again. When the bobbin is
fully wound, it will stop automatically. Return the
bobbin to its original position by moving the spindle
to the left, and cut the thread as shown.
14