Kenmore 200 User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Condition
Cause
Reference
Patterns are
distorted.
1. The correct presser foot is not used.
2. The needle thread tension is too tight.
3. The embroidery hoop attaching knob is loose.
4. The carriage is bumping into something around the machine.
5. The fabric is not puiied tightly enough on the embroidery hoop.
6. The fabric is caught or pulled for some reason when sewing
embroidery.
Use the correct foot.
Pages 26, 32
Page 59
Page 59
Page 58
Stop the machine &
Free the fabric.
Pattern selection
key does not work.
V
1. The bobbin winder spindle is in the winding position.
2. The control circuit is not working correctly.
3. Key position is out of alignment.
Page 14
Turn the switch off &
turn it on again.
Page 21 ^
For customer assistance call or e-mail:
1-877-SEWING-U {1-877-739-4648)
9 am - 4:30 pm, CST, Monday - Friday
support@(enmore-sewing.com
(U.S.A. only)
83