Kenmore 200 - Manual (Page 25)

Pattern Selection
Press the stitch pattern indication key to select the desired
stitch pattern.
(T)
Name of stitch
(2) Stitch image
(3) Selected needle type {single or twin)
® Suitable pressure dial number
(f) Suitable thread tension number
(D
Sound mark (the mark will disappear when the sound
volume set to 0)
(7) Suitable presser foot
Utility Stitches
When you press Conventional sewing mode key, the utility
stitch window opens.
In the Conventional sewing mode, there are 6 categories of
sewing to choose from.
(
8
)
Utility stitches
You can select 15 types of utility stitches.
(D
Buttonhole stitches
You can select 7 buttonhole variations, darning, tacking
and eyelet.
@ Satin stitches
You can select the desired satin stitches, elongation
patterns and also program assorted stitch combinations.
Cl) Decorative stitches
You can select decorative stitches and also program
assorted stitch combinations.
Monogramming
You can make monograms and combinations of letters,
symbols and patterns.
C|) Mode Key
Press the ¡Mode) key to enter the Mode selection.
Twin needle key
Press twin needle key to enter the twin needle sewing
mode.
@ Needle up/down key
You can set the needle position with this key, up or down
when the machine stops.
® Adjust key
When you press this key, the stitch adjusting window will
open. You can change setting to stitch length and width
by pressing the : + or — key
19