Kenmore 200 - Manual (Page 69)

® Return carriage key
Press the key to bring the carriage back to its home
position after finishing embroidery.
Note:
Before you turn the power switch off in Embroidery mode,
always be sure to press the key to return the carriage
to its home position.
) Return key
When you press the key, the previous pattern
selection screen wii! be displayed.
) Stitch back/forward keys
The stitch back/forward function is very useful when
thread runs out or breaks during embroidery sewing.
When embroidery sewing has started, the screen will
indicate the current stitch count. The jog keys ® wii!
disappear and the stitch back/forward keys (9) will be
indicated on the screen. You can use these keys to move
the embroidery hoop to where the thread has broken or
run out.
Press the M key to move the hoop back to a previous
sewing point. The hoop will move backward 10 stitches
every time you press this key.
Press the ;+J key to move the hoop ahead. The hoop will
move forward 10 stitches every time you press this key.
) J og/ST key
Press key to switch the jog keys to the stitch back/
forward keys or vice versa. When opening the
embroidery screen, the jog keys appear. When you start
to embroider, the stitch back/forward keys will appear.
If you want the stitch back/forward keys to appear
before you start embroidery sewing, or if you want the
jog keys to appear after you start sewing, press the
key and the keys will change.
In the right upper corner of the window, the following
useful information is indicated.
(JJ) The approximate sewing time in minutes
@ Number of thread color changes
(0) Embroidery design size
® Embroidery hoop and its size
i 00001 ST;N0;
_ 4 .
Mode
% ^
I^Hp
mi
Edit
ii
■if
IliftEIiSHliiE.
;|R5^oS^3inch
63