Bobbin winding, Horizontal spool pin, Additional spool pin – Kenmore 200 User Manual
Page 19: Horizontal spool pin • additional spool pin
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
• Removing the hook cover plate
(T) Hook cover plate release button
(D Hook cover plate
(3) Bobbin
Slide the hook cover plate release button ® to the right,
and remove the cover plate (2).
Lift out the bobbin (I) from the bobbin holder.
' Horizontal spool pin
(T)
Spool pin
(D Large spool holder
(3) Small spool holder
Lift up the spool pin (T). Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the iarge spool holder
(2),
and press it firmly
against the spool of thread.
The small spool holder (3) is used with narrow or small
spools of thread.
' Additional spool pin
(T) Additional spool pin
(D spool pin hole
(D
Spool pin felt
(4) Spool stand
The additional spool pin
(T)
is for bobbin winding, without
unthreading the machine, and for twin needle sewing.
Insert the additional spool pin ® into spool stand 0 and
the hole 0.
Place the felt 0 and a spool on the pin as illustrated.