Wire connection with frame-grounding conductor – Kenmore Washer/Dryer User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 5. Connect neutral grounding wire
and the neutral wire (white) of power
supply cord under the center screw of
terminal block.
STEP 6.
Connect the other two insulated
wires to outer terminal block screws.
STEP 7.
Connect the grounding wire
(green) of the power supply cord to the
external grounding conductor screw.
Securely tighten all electrical connections.
STEP 8.
Insert tab of teiminal block
cover into slot of the laundry center rear
panel. Secure cover with hold-down
screw.
Proceed with Installation on page 27.
Neutral
grounding wire
(green/yellow)
Green wire
of power supply
cord or bare ____
copper wire
Center silver-
colored terminal
block screw
External
ground
connector
Neutral wire
(white)
^4-inch, U.L.-listed,
strain relief
4-Wire Connection with
Frame-Grounding Conductor
24