Sharp Aquos LC 46SE94U - Manual (Page 24)

On-Screen Display Menu
■l/PSettingV:VV.:VVVVVV V V V V V V V ' ^
Converts input signals depending on the type of
images.
Fast: Suitable for fast-moving images
SSow: Suitable for smooth images with low amounts of
flickers
ifftlB
• "l/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On: Detects, analyzes, converts film source.
Off: Normal viewing mode.
"Film Mode" does not function when you set the "AV Mode"
to "Game".
"Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
.Diglta:! Noise ^Reduction............................
Produces a clearer video image.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
:3D-Y/e :
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving Images.
Off (2D): For Game Mode.
» 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
I f y i o r i O C h r d i T i e t t 1 1 1 1 1 1 1 . 1 1 1 1 1 1 F t ; F J f y ( I f
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
fBiiijetdf.OPCf ■■ .j .(.(.(.(.(F.(.(.(.(.(.(f (FFFFF.-
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of -16.
Max.: -15 through +16
Min.: -16 through +15
•
• The range of OPC settings are active only when the OPC is
set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
» The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPG sensor might not operate if the adjustment range is
small.
Audio Menu
You can adjust the sound quality to your preference
with the following settings.
Example
1 Press MENU to display the MENU screen, and then
press to select "Audio".
2 Press 4 /T to select a specific adjustment item.
® Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
3 Press AfT (or -^/►) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
.■ .-Selected ite.rnr) :«i(bU:tion.FFF ^ ■wwaiiiutiSKY:^
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from
the right speaker
Decrease audio from
the left speaker
* Audio menu is grayed out when Output Select is set to "Variable".
» For resetting all Audio adjustment items to the factory
preset values, press to select "Reset", press ENTER,
press to select "Yes", and then press ENTER.
Surround function aibws you to enjoy reaiistic "live" sound.
On: Surround function is on.
Off: Normal sound.
» You can choose Surround by pressing SURROUND on the
remote control unit. (See page 16.)
» Audio menu is grayed out when Output Select is set to "Variable".
® For some discs, setup may be required on your DVD player. In this
case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
ffgpft
* Audio menu is grayed out when Output Select is set to "Variable".
)- 23