Sharp Aquos LC 46SE94U User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-Screen Display Menu
5
Press
ENTER
to start checking the data in the
USB memory device.
7
Press
ENTER
to start updating,
• The screen becomes dark for a whiie until the update
screen can be displayed. Please wait for the update
screen to appear. Do not unplug the AC cord.
6
During the data checking, “Checking" biinks.
Example
The
current version of the
TV
software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
file, select
“Yes”,
and then press
ENTER.
Example
if the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
• Do not remove the USB memory device or unplug the
AC cord
while
the software
is
being updated.
8
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
If the update has failed, check the file in the USB
memory device and try Software Update again.
9
After the screen shown below is displayed, press
ENTER
10
Remove the USB memory device.
32