Ventilation & cleaning tips – Sharp Aquos LC 46SE94U User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
® It's best to use 2 people to remove the AQUOS television for stability.
» Lift onto Installation location as the diagram Illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television In a well ventilated area and make sure not to place It by a heat source or use It near
water. The AQUOS television Is designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen Is glass and can be scratched or broken when dropped or Impacted.
QUICK INSTALLATION TIPS
■| Attach your antenna to the back of the AQUOS
television. (See page 12.)
2 Connect the AC plug for the AQUOS television Into
the AC outlet.
Place the TV close to the AC outlet, and keep the power
plug within reach.
This product must only be connected to a 120 V, 60 Hz,
grounded (3-prong) outlet.
Connecting It to any otlier kind of outlet will damage the
product and Invalidate the warranty. (LC-65SE94U only)
* TO PREVENT
RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY
CABLES
WITH
THE AC
CORD
CONNECTED.
3 Place the Ferrite core in the space indicated in the
below figure and bundle the cords properly with
the cable clamp and the cable tie.
How to turn on the AQUOS television for the first
time.
A) Press POWER on the AQUOS television.
B) The POWER indicator on the front of the
AQUOS television lights BLUE.
TV angle cannot be adjusted.
O- 7