Digital setup menu – Sharp Aquos LC 46SE94U User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-Screen Display Menu
Digital Setup Menu
This setting aliows you to optimize the settings of
Digital broadcasting.
Example
^ Digital Setup
I
FREEZE
О
MENU
О
Press
MENU
to display the MENU screen, and then
press to select "Digital Setup".
Press ^/T to select a specific adjustment item,
and then press
ENTER
Press ^/T (or -
4
/^) to select the desired setting,
and then press
ENTER
Press
MENU
to exit.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT ferminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected,
PCM: The optical output termina! outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PGM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
The current version of the TV software is displayed.
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV,
To check for the availability of a software update, visit
. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).
Ф
CD
CD
1
FREEZE
1 гч
MFNU
ГЧ
<D
Ф
1 ^
II
w
CD
Ф
CD
Э
CD
Ф
I
EXIV
1
0
RETLtRti
0
Ш
i№U
0
FLASHBACK
0
1 ©
FAVORITE CH
© ©
©
ЕШЙШШ
• Do not
remove
the USB memory device or unplug the
AC cord while the software is
being
updated.
• Be
sure
to properly follow the whole procedure
described
below,
step by step. Otherwise, for
example, the TV cannot read the data In the
USB
memory device and software updating will fall.
1
Insert the USB memory device with the update file
into the SERVICE terminal on the TV.
2
Press
MENU
to display the MENU screen, and
then press to select “Digital Setup”.
3 Press Д/Т to select “Software Update”, and then
press
ENTER.
• If you have already set the Secret No., go to step 4.
■ 'J
Digital Setup
Software Update ■ ■ ■
4
Input the 4-digit secret number by using
0-9.
( Digital Setup
)- 31