Sharp Aquos LC 46SE94U - Manual (Page 30)

On-Screen Display Menu
Option Menu
Example
0 Option
1 Press MENU to display the MENU screen, and then
press -4/^ to select "Option".
2 Press a /T to select a specific adjustment item and
then press ENTER.
3 Press ^/T (or - 4 /^) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Skip this step for "Audio Only".
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
ifSll
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 3, you may need
to change the input signal type setting from the list
below:
Auto/COMPONENT/VIDEO
f the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
» Refer to your external equipment operation manual for the
signal type.
» If you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
» Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or 3:
® COMPONENT VIDEO
(2) VIDEO
HOMI Set
To watch an HDMI or PC-IN equipment image, select
"INPUT 4", "INPUT 5" or "INPUT 6 " from "INPUT
SOURCE" menu using INPUT on the remote control
unit or on the 1 T/.
Auto View:
Enable: To use View Mode based on signal
recognition, including an HDMI signal.
Disable: No function.
Audio Select:
Digital: For an audio signal via the HDMI terminal.
Analog: For an audio signal via the R-AUDiO A
terminal.
Ill'S'
« Refer to your external equipment operation manual for the
signal type.
® "Audio Select" is only available for INPUT 6.
» When connecting an HDMI-DV! conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Allows you to select what controls the audio output.
Fixed: Sound via speaker Is adjusted with VOL+/- on
the remote control unit or VOL+/- on the TV.
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent level.
Variable: Sound via the AUDIO OUTPUT terminal is
adjusted with VOL+/- on the remote control unit or
VOL+/- on the TV.
Sound via speaker is muted.
Color System
Select the video signal system compatible with your
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
"Color System" can only be set for the INPUT 1 VIDEO,
INPUT 2 and INPUT 3 VIDEO.
If you have already set the Secret No., input the 4-diglt
secret number here. See page 26 for setting a secret
number.
)- 29