Supplied accessories, Quick reference, Attaching the speaker unit – Sharp Aquos LC 46SE94U User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Supplied Accessories
Make sure the following accessories are provided with the product.
Aiways use the AC cord supplied with the TV.
AC cord enclosed in this product is for 110-125V. in using it on the 125-240V AC, please consult the foiiowing.
SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP
6100 Blue Lagoon Drive, Suite
150,
Miami, Florida
33126,
U.S.A.
QUICK REFERENCE
Attaching the Speaker Unit
» Before attaching (or detaohing) the speaker unit, unplug the AC cord from the AC INPUT terminal.
■ LC-65SE94U
-j
Confirm that there are 4 screws and a screwdriver
supplied with the speaker unit.
2 Insert the projections on the speaker unit into the
corresponding slots on the TV, then fasten the screws.
3 Connect the ends of the cables to the speaker
terminals as shown below.
Connect the leads to the speaker terminals of the
same color.
Insert and tighten the 4 screws with the screwdriver
(supplied with the product) in the order of ®, (
2
).
(3) and
To detach the speaker unit, perform the steps in reverse
order.
O- 5