Using aquos link, Controllihg hdm| equipment u^jng aquos link, What’s aquos link – Sharp Aquos LC 46SE94U User Manual
Page 36: One touch play, One touch recording, Single remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using AQUOS LINK
Controllihg HDM| Equipment U^jng AQUOS LINK
What’s AQUOS LINK?
® Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD).
® By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the 1A/, you can control a
recorder or AV amplifier using the remote control of the TV.
® AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Point the remote control toward the TV, not to connected HDMI equipment.
Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certifled cable.
Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
These operations afferrt the HDMI equipment selected as the current input sourrre. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
0
VCFl AUOlO
CBL/SAT l>VO FUNCTION'
° ° @
LIGHT
E3 C23
C3
C3
®
CS SZ! QD
@9 El (
l
D
You can operate AQUOS LINK-compatible devices with the remote control
unit when the
FUNCTION
of the remote control unit is set to TV.
REC STOP
and
OPTION
buttons will function only when AQUOS LINK is
used.
■ One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
J’ I I /•• /
/
/ MUTE
O tv (b/ o
FREEZE
MENU
O
O
0 0
------- FAVORITE CH ----------
© © © ©
FE. !:T.P ^PTI.Ii
i
-AJII
i
:
□ o a
SI bt-r Aimici .It, I It- ■ f j
O O O CD
■ One Touch Recording
Press
REC
while you are viewing a broadcast received with the AQUOS
LINK-compatible recorder. The AQUOS LINK automatically recognizes the
connected HDMI device and starts recording.
■ Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and
you can control the TV and the devices as if using a universal remote control.
■ Control
the AQUCS LINK-compatible
audio system
Set the volume of AQUOS LINK-compatible audio system.
The above description is an example of the AQUOS LINK function.
The steps in “AQUOS LINK Setup” on page 36 need to be compieted beforehand.
Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.
O- 35