CNET CWR-854 User Manual
Page 27
27
maximum performance is desired.
Broadcast SSID: When enabled allows all wireless stations to detect the SSID of
this wireless router.
IAPP: The Inter-Access Point Protocol (IAPP)
can extend multi-vendor
interoperability to the roaming function.
802.11g Protection: Is used to prevent packet collision and increase
performance in wireless networks with both 802.11b (using CCK modulation) and
802.11g (using OFDM modulation) devices.
WMM: The short of Wi-Fi Multi-Media. It will enhance the data transfer
performance of multimedia content when they are being transferred over wireless
network. If you do not know what it is / not sure if you need it. It’s safe to set this
option to “Enable”, however, default value is “Disable”.
RF Output Power: Output power can be set of wireless radio. Unless you are
using this wireless router in a really big space. You may not have to set output
power to 100%. This will enhance security.
Turbo Mode: The data rate will up to 72Mbps when the turbo mode is enabled.
Please be noted the turbo mode might have compatibility issue when be used
without Realtek solution.
Apply Changes: Click on “Apply Changes” to save the setting.
Reset: Click on “Reset” button to undo your changes.