CNET CWR-854 - Manual (Page 64)

64
wireless radio button might be
in the off position configured to start
automatically.
• A wireless network adapter
driver failing in early stages of
service startup may result in
the Wireless Zero
Configuration or Wireless
Configuration service not
initializing over that interface.
Client can't connect to the
AP/Router's configuration
utility. • Wrong IP address • Make sure that your PC is
using an IP address within the
correct range. It should be
192.168.1.2 to 192.168.1.254
for the default value.
• Make sure that the address
of the subnet mask is
255.255.255.0.
• Try to use “Ping” utility to ping
the AP/Router’s IP, the default
IP should be at 192.168.1.253
or 192.168.1.254 for AP and
Router respectively.