CNET CWR-854 - Manual (Page 43)

43
 PPPoE
PPPoE stands for “Point-to-Point Protocol over Ethernet”. PPP is the technology used for dialup
Internet access. PPPoE works similarly except it works over a network connection. In this
connection type, users are required to enter their PPPoE username and password. Some ISPs
also require a service name to be entered. Usually, it’s not needed to enter the IP/DNS addresses.
However, if users have static IPs through PPPoE, then they will need to enter IP and DNS
addresses ISP provides.
 WAN Access Type: PPPoE connection type.
 User Name: User Name provided by ISP.
 Password: Password provided by ISP.
 Service Name: Fill in the service name of Service Name. The default value is
empty.
 Connection Type: There are three connection types – continuous, connect on
demand and manual.

Continuous: the connection to the ISP is always connected.
 Connect On Demand: the connection to the ISP is initialized only when an